CAMERA SOURCE Ford Universal Front Camera and Force OEM Rear cam
Regular price $459.00
DETAILS
Add a front camera to your vehicle and force the factory rear camera at any speed!
Adding a front camera to select Ford 8" Factory Display Radios could never be simpler and more affordable! - see application section for details.
This CMOS license plate mounted camera kit will allow you to integrate front view safety to your factory 8" display. The camera can be converted to mount on any flat surface or simply mount to your license plate! Both brackets are included. All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included factory display Interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
Force Factory Rear camera: The included camera interface module also allows you to force your factory rear camera on at any speed. Perfect for towing!
View Front camera at any time: Perfect for parking!
Navigation unlock: This interface module allows passenger access to the Navigation menu while vehicle is in motion. Enter a destination address on the go!
Interface module features:
- Front Camera composite video input.
- Composite video input is controlled by the Volume button.
- Our video interface will also enable : Passenger access to Navigation menu while vehicle is in motion.
- Force OEM Rear Camera at anytime (requires wire splicing).
- Force Front Camera at anytime.
- Video Interface is 100% Plug & Play, *OEM Rear camera forcing requires wire splicing.
12 volt Power source included.
No monitor is included with this kit as it is designed to work with your existing factory radio screen. This camera comes with a 3 year warranty. Professional installation is recommended.
SPECIFICATIONS
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Forward facing
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
COMPATIBILITY
Vehicle must have a 8" factory SYNC 3 radio display and factory installed back up camera.
2016-2019 F-150
2017-2019 F250,F350, F450, F550
2017-2019 Explorer
2016-2019 Expedition
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. .
INSTALLATION INFORMATION
Camera installs on either your license plate mount or on any flat surface - comes with two brackets. The camera power and ground harness gets run to the included power module that connects to the battery.
The camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install. OEM Rear camera forcing requires wire splicing. Detailed instructions included.
Plug the camera RCA into the RCA input on the interface module.
ADDITIONAL INFORMATION
Video System: NTSC
Vehicle Interface: Includes Factory Integration Module
Waterproof/Dustproof Level: IP 67
Night Vision: < .2 Lux
Power Supply: 12 Volts
Number of Cameras: 1
Wiring Type: Hard Wired Full Harness
System Manufacturer: EVI Systems
Camera Resolution: 600 TVL
Parking Guidelines: Selectable on/off
Camera Orientation: Front Facing
Connection: Plug and Play to Factory Dash Display
Sensor Type: Super CMOS
Sensor Brand: EVI Systems
Viewing Angle: 170 Degrees
Camera Input Ports: 1
Warranty: 3 Year Limited
