Camera is FMVSS 111 compliant! Adding a backup camera or front camera to a Ford car or truck with an 8" SYNC 3 Factory Display Radio could never be simpler and more affordable!
This CMOS license plate mounted backup camera kit will allow you to integrate rear view or front view safety to any vehicle with a license plate and an 8" factory SYNC 3 factory display. In fact, the camera can be converted to mount on any flat surface! All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included Multi-Camera Interface . The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!
Interface module features:
The integration module is plug and play with your factory SYNC 3 system. Allows connection of 3 cameras to the factory screen in addition to the OEM backup camera. Also, allows monitoring of any connected camera at any time while driving (not including OEM backup camera). Right and left blind spot camera inputs are automatically triggered by the turn signals. Factory rear camera is not available above 7 mph.
12 volt power module included- No cutting or splicing of factory wiring!
No monitor is included with this kit as it is designed to work with your existing 8" SYNC 3 radio screen . This camera comes with a 3 year warranty and the interface module has a 1 year warranty. Professional installation is recommended.
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Mirror/Non mirror selectable
- Water proof: IP67
- 25 foot harness- loomed if you select vehicle type "Truck" from drop-down when ordering
- 3 year warranty on the camera
The 8" interface module is compatible with any vehicle that has a SYNC 3 factory display.
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep.
Install on either your license plate mount or on any flat surface - comes with two brackets. The multi-camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install.
12 volt power module connects directly to the battery. Camera power wire connects to the power module.
Video System: NTSC
Vehicle Interface: Includes Factory Integration Module
Waterproof/Dustproof Level: IP 67
Night Vision: < .2 Lux
Power Supply: 12 Volts
Number of Cameras: 1
Wiring Type: Hard Wired Full Harness
System Manufacturer: EVI Systems
Camera Resolution: 600 TVL
Parking Guidelines: Selectable on/off
Camera Orientation: Front or Rear Facing
Fit Type: Universal fit
Connection: Plug and Play to Factory Dash Display
Sensor Type: Super CMOS
Viewing Angle: 170 Degrees
Camera Input Ports: 4
Warranty: 3 Year Limited