This is a OEM backup camera solution for your 2015 Ford F-150 truck with 8.4" MyFord Touch radio display screen! This will fit the new generation 2015 F-150 pickup truck as an OEM factory replacement handle with our Camera-Source exclusive pre-mounted camera. This kit will look like it was installed at the factory, but cost you a fraction of the price! This system does not require dealer programming, and camera will see the rear bumper and hitch in the display.
Kit includes the following:
- 8.4" Factory display interface module - plug and play and no dealer flashing required! (Display not included)
- Factory Ford tailgate handle with Camera-Source exclusive camera premounted - black textured surface
- 25' Wiring harness with quick tailgate disconnect and weather pack connectors for a tight water resistant connection. This ensures your wiring is protected, all electrical connections can be made inside the cab to avoid corrosion, and the tailgate can be unplugged with ease!
- Wire connectors
- Zip ties
- Detailed installation instructions
- 8.4" RADIO IN PICTURE IS NOT INCLUDED
- Super CMOS chip - outstanding color, contrast, and clarity!
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
- Factory Ford backup guidelines - a Camera-Source exclusive! (These are the red, yellow, green lines with the black centering line on the screen)
MYTOUCH MULTI CAM INTERFACE
- Uses existing 8” MyFord Touch SYNC 2 factory display -screen not included
- Allows addition of front camera that can be manually triggered using your radio power button. (Sold separately)
- Also add side cameras with turn signal activation-(Sold separately)
- Pass through for existing factory backup camera
- Shuts off front video at speeds over 7mph.
- Press power button on radio to manually activate cameras, then tap power button again to toggle between them
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch!
No monitor is included with this kit as it is designed to work with your existing 8.4" radio screen. This camera comes with a 3 year warranty and is guaranteed to fit or your money back. Professional installation is recommended.
2015 F-150 pickup truck with 8.4" display screen.
This is a direct replacement for your factory tailgate handle. The integration module will allow a direct plug and play connection to the back of the 8.4" radio screen for a simple install and a factory look!
You will need to open the dash to access the back of the factory radio. The interface module programs the radio to accept the back up camera, creates a RCA connection for the camera, and powers the camera.
Video System: NTSC
Vehicle Interface: Includes Factory Integration Module
Waterproof/Dustproof Level: IP 67
Night Vision: .1 Lux
Power Supply: 12 Volts
Wiring Type: Hard Wired Full Harness
System Manufacturer: EVI Systems
Camera Resolution: 600 TVL
Parking Guidelines: Selectable on/off
Camera Orientation: Rear Facing
Fit Type: Factory OE Fit Replacement
Connection: Plug and Play to Factory Dash Display
Sensor Type: Super CMOS
Viewing Angle: 170 Degrees
Camera Input: Ports 3
Warranty: 1 Year Limited