We are a custom auto shop that works on trucks daily and installs the products that we sell. You can shop with peace of mind knowing you have an experienced staff a click or call away
that will offer FREE advice on product recommendations, product installs, upgrades and much more!
Read below what our staff thinks about some of the products we install. More shop product reviews coming soon!
FORD SUPER DUTY UPGRADED DOOR STRIKER FOR 1999-2016 (SET OF 4)
“Door Striker are easy to install and super quiet. It only takes 10 minutes to do all four doors.” — Steven Ernster // JUNE 2020
UNIVERSAL LED ROCK LIGHT KIT (SET OF 4)
“I like the Rough Country rock light set because they look like a factory install. They also are round, so they are easy to cut into a box side or wherever you decide to put the lights. We like to use them here as a box/bed lighting system. They put out a good amount of light, but still have a subtle appearance.” — Chad Eddy // JUNE 2020
KLEINN AIR HORN
“This air horn is easy to install, the hardest part is finding a spot to mount the tank and compressor. It’s also very loud - everyone wants Chad to stop blaring it in the shop - and the air compressor and air tank are a good quality, but that’s what we do, quality stuff.” — Tate Ziebart // JUNE 2020
2 PORT USB SOCKET
“To install, remove the lower B pillars and front thresholds, then run wire across from the driver’s side to the passenger’s long enough to go up into the B pillar. Do that for both sides. Then, run a wire from the driver’s side to under the dash. Next, you do the grounding at the B pillar, then go 6 1/2 in. down from the top of the bottom B pillar trim and make a hole in the center. Lastly, put the USB in from the front, make the connection and put everything you removed back together.” — Steven Ernster // JUNE 2020
3 1/2” READY LIFT SUSPENSION LIFT KIT
“The nice thing about this lift kit is that it keeps all the factory suspension, ride quality and payload capacity but with a lifted pickup, making the truck look and ride nice.” — Tate Ziebart // JUNE 2020
“This 3 1/2 in. lift kit is just the right amount of lift and still easy to get in and out. A good quality for the price, too.” — Angel Eddy // JUNE 2020
CAMERA SOURCE 3RD BRAKE LIGHT CAMERA
“The 5th wheel cams are easy to install once you take out everything that’s ‘in the way’. You have to take out the passenger kick cowl, passenger front and rear thresholds, the lower part of the B and C pillars and drop the headliner. Next, you fish the wire up the C pillar and run it all the way back to the dash. Then, you unplug the stop lamp, run the wire for the camera through behind the headliner down to the lower C pillar, lay the camera over the stop lamp and screw them in place on the cab, make the connection in the C pillar, and put everything you removed back together.” — Steven Ernster // JUNE 2020